Dakota 2WD V8-4.7L VIN J (2005)
1. Place the regulator into the door and engage the bolts (5 and 3) into the keyhole slots in the door.
2. Install the regulator mechanism bolt (1).
3. Install the two lower bolts (5).
4. Tighten all the regulator bolts to 10 N.m (85 in. lbs.).
5. Remove the tape used to secure the glass during removal and position the glass (1) into the glass clamps.
6. Temporarily install the window crank handle and raise the glass into the full up position.
7. Tighten the glass clamp screws (2) securely.
