Dakota 2WD V8-4.7L VIN J (2005)
1. Apply bead of adhesive (1) with a triangular nozzle directly to the windshield seal starting at bottom in center of windshield.
CAUTION: Always apply bead of adhesive to the windshield. Always install the windshield within 5 minutes after applying adhesive.
2. Bead dimensions should be approximately 9.5 - 12.0 mm wide (1) by 12.7 - 14.0 mm in height (2).
3. Allow end of adhesive bead to run out parallel to the start of the bead and smooth ends flush.
