Dakota 2WD V8-5.9L VIN Z (1998)
Inboard Brake Shoe
9. Remove inboard shoe by tilting shoe outward until retainer spring is clear of caliper piston.
10. Support caliper with wire from suspension component. Do not allow brake hose to support caliper weight.
INSTALLATION
1. Clean slide surfaces of adapter ledges with a wire brush. Then lubricate surfaces with a thin coat of high temperature grease.
2. Install new slide pin bushings if necessary.
3. Install inboard shoe. Be sure retainer spring is firmly seated in caliper piston.
Fig. 10 Outboard Brake Pad Installation
4. Insert outboard brake shoe in caliper.
