Dakota 2WD V8-5.9L VIN Z (1998)
7. The drive belt idler pulley must be removed to gain access to one of A/C compressor/generator bracket mounting bolts. Remove idler pulley bolt
and remove idler pulley
8. Remove oil dipstick tube mounting bolt at side of A/C-generator mounting bracket.
9. Disconnect throttle body control cables.
10. Remove heater hose clamp and heater hose from heater hose coolant return tube.
11. Remove heater hose coolant return tube mounting bolt and remove tube from engine. Discard the old tube O-ring.