dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Heater-A/C Housing Cover Removal and Installation|Page 5402 > < Heater-A/C Housing Cover Removal and Installation|Page 5400
Page 2
background image

Panel-Defrost Door

1. Remove the heater-A/C housing from the vehicle, and remove the housing cover. 

Panel-Defrost Diaper Remove/Install

2. Lift the panel-defrost door out of the heater-A/C housing.
3. Reverse the removal procedures to install.

Recirculation Air Door

A recirculation air door and vacuum actuator are used only on models with the optional air conditioning system.
1. Remove the heater-A/C housing from the vehicle, and remove the housing cover. 
2. Remove the recirculation air door actuator from the blower motor housing cover.

Recirculation Air Door Remove/Install

3. Lift the lower end of the recirculation air door up far enough so that the door lever is clear of the recirculation air intake grille, then twist the door

to remove the door pivots from the pivot holes in the blower motor housing cover.

4. Remove the recirculation air door from the blower motor housing cover.
5. Reverse the removal procedures to install.

Heater-A/C Housing Cover Removal and Installation|Page 5402 > < Heater-A/C Housing Cover Removal and Installation|Page 5400