Dakota 2WD V8-5.9L VIN Z (1998)
Gauge Block
16. Install Gauge Block.
17. Install Gauge Block SP-5383 at the end of SP-5385.
18. Install Cap Screw SP-536 and tighten with Wrench SP-531.
Crossbore Arbor
19. Position Crossbore Arbor SP-6029 in the differential housing.
20. Center the arbor tool.
21. Position the bearing caps on the arbor tool.
22. Install the attaching bolts.
23. Tighten the cap bolts to 14 Nm (10 ft. lbs.).
Depth Shim(s) Selection
24. Trial fit depth shim(s) between the crossbore arbor and gauge block. The depth shim(s) fit must be snug but not tight (drag friction of a feeler
gauge blade).
