Dakota 2WD V8-5.9L VIN Z LDC (2000)
4.
Spray lubricant pin 04318066 around locating pin (Figure 1). Be careful to ensure that white lubricant does not get on the carpet.
5.
Position the locating pin of the outboard foot of the power seat track in the center of the locating hole (no metal-to-metal contact). It may be
required to loosen the rear power seat track attaching bolts in order to be able to position the locator pin into the center of the locator hole.
6.
Secure the power seat track by installing the front M8 attaching bolts and tightening all fasteners (front and rear) to 27 Nm (20 ft.lb.).
7.
Attach the power seat track covers (Durango only).
8.
Verify the repair by performing the diagnosis again. Repeat the process until repair is successful.
POLICY: Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
Labor Operation No:
23-13-60-94
0.2 Hrs.
FAILURE CODE: 68 - Noisy
Disclaimer
