Dakota 2WD V8-5.9L VIN Z LDC (2000)
2.
Drill a 19 mm (3/4 in.) hole into the end of the heat duct extension as shown in Figure 2.
3.
Install the driver side heat duct extension.
4.
Secure the driver side heat duct extension with new pushpin(s) p/n 05019472AA if the extension was secured by pushpins when it was removed.
POLICY: Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
Labor Operation No:
24-65-49-92
0.2 Hrs.
FAILURE CODE: AM - Authorized Modification
