Dakota 2WD V8-5.9L VIN Z LDC (2000)
end of the cowl plenum.
9. Disconnect the windshield washer supply hose at the in-line connector.
Vacuum Reservoir
10. Disconnect the vacuum supply hose from the vacuum reservoir, which is secured to the underside of the right end of the Cowl plenum cover/grille
panel.
11. Remove the cowl plenum cover/grille panel from the vehicle.
12. Remove the three screws that secure the vacuum reservoir to the underside of the cowl plenum cover/grille panel.
13. Remove the vacuum reservoir from the cowl plenum cover/grille panel.
14. Reverse the removal procedures to install. Tighten the vacuum reservoir mounting screws to 2.2 Nm (20 in. lbs.).