dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Fluid - A/T|Specifications > < A/T - ATF + 4 Fluid Usage|Page 1029
Page 2
background image

4.

Check the fluid level against the fluid level/temperature chart (Figure 1).

NOTE:

WHEN COLD (BELOW 10° C {50° F}) THE FLUID LEVEL WILL NOT REGISTER ON THE DIPSTICK.

Fluid/Filter Replacement

Accurate fluid level is difficult to determine cold. Initially add only 5
quarts of fluid during the refill procedure. **This amount will allow the engine to be started and the transmission to be operated in neutral until the
transmission temperature has reached at least 21 C (70° F.)**. Once the fluid temperature is known, the final amount can be added without overfilling the
transmission. Additionally, during this procedure, pressure switch and/or loss of prime DTC's may be set. If they are, erase them using the DRB Ill®
before returning the vehicle to the customer.

POLICY: Information Only

Fluid - A/T|Specifications > < A/T - ATF + 4 Fluid Usage|Page 1029