Dakota 2WD V8-5.9L VIN Z LDC (2000)
THIS WARNING COULD RESULT IN OCCUPANT INJURIES UPON AIRBAG DEPLOYMENT.
1. Carefully position the passenger side airbag module upper mounting bracket to the upper airbag door flange and bracket on the underside of the
instrument panel top cover.
NOTE: Use only the correct rivets that are specified in the Chrysler Mopar Parts Catalog, or that are supplied in the service package with the new
airbag module and/or the new instrument panel top cover when installing the passenger side airbag module.
2. Secure the passenger side airbag module upper mounting bracket to the upper airbag door flange and bracket with four rivets.
3. Remove the masking tape applied to the passenger side airbag module vents during the removal procedures.
4. Install the instrument panel top cover and the passenger side airbag module onto the instrument panel as a unit. Refer to Instrument Panel Top
Cover in the Removal and Installation.
5. Be certain that the passenger side airbag module wire harness connector is fully engaged with and latched to the instrument panel wire harness
connector.
6. Do not reconnect the battery negative cable at this time. Refer to Airbag System in the Diagnosis and Testing for the proper procedures.
