Dakota 4WD V6-239 3.9L Magnum (1996)
Engine Mount: Service and Repair
Front Mount
1. Disconnect battery ground cable, then position fan to ensure clearance for radiator top tank and hose.
2. Install suitable lifting device to engine, then raise and support vehicle.
3. Install front axle lifting device and raise front axle slightly.
4. Remove mount through bolt, nut and washer assembly attaching engine mount bracket to insulator bracket, then raise engine slightly to clear
insulator bracket stud.
Fig. 6 Right Front Engine Mounts. 4WD Models
5. On left side, remove bolt attaching engine/pinion nose/transmission and front support bracket to engine block, Fig.5.
