Dakota 4WD V6-239 3.9L Magnum (1996)
Electronic Brake Control Module: Service and Repair
With Four Wheel Antilock System
Fig 18 Releasing Main Harness Connector
Fig 19 Removing Main Harness Connector From Module
NOTE: The ABS module is located in the engine compartment attached to the forward side of the front brake anti-lock valve.
ABS ELECTRONIC CONTROL MODULE REMOVAL
1. Disconnect upper harness connector from module.
2. Lift connector locking handle to release main harness connector from module. Rotate handle upward to clear connector.
3. Lift connector up and out of retaining lugs on module.
4. Remove screws attaching module to mounting bracket and remove module.