Dakota 4WD V6-239 3.9L Magnum (1996)
Headlamp Switch: Service and Repair
1. Disconnect ground cable from battery.
Steering Column Cover
2. Remove lower cover and instrument cluster bezel.
3. Remove five switch bezel screws, then pull switch and bezel assembly to rear and disconnect wiring.
4. Remove and discard nut, then push release button on right side of switch and pull headlamp knob out.
5. Separate bezel from switch and mounting assembly, then remove spanner nut and remove headlamp switch from mounting bracket.
6. Reverse procedure to install.
