dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

ABOUT US
Governor, A/T > < A/T - Engine Bucking/Surging at 5,300 Rpm|Page 2498

Dakota 4WD V6-239 3.9L Magnum (1996)

Page 1
background image

Fluid Pump: Service and Repair

REMOVING OIL PUMP AND REACTION SHAFT SUPPORT

1. Tighten front band adjusting screw until band is tight on front clutch retainer. This prevents retainer from coming out with pump and causing

unnecessary damage to clutch components.

2. Remove oil pump bolts.
3. Remove oil pump and reaction shaft support assembly with two slide hammer tools C-3752 (Fig. 3). Thread slide hammers into threaded holes in

pump body flange.

Governor, A/T > < A/T - Engine Bucking/Surging at 5,300 Rpm|Page 2498