Dakota 4WD V6-239 3.9L VIN X FI (1989)
BRAKE SHOE INSTALLATION
1. Lubricate anchor pin and brake shoe contacts surfaces of support plate.
-
Use Mopar multi purpose grease or Lubriplate or equivalent.
2. Lubricate adjuster screw socket, nut, button and screw thread surfaces.
-
Use Mopar multi purpose grease or Lubriplate or equivalent.
3. Attach parking brake cable to lever. Then connect lever to secondary shoe.
Fig 7 Installing Brake Shoes
4. Install primary shoe on support plate. Secure shoe with new spring retainers and pin.
5. Install spring on parking brake strut and engage strut in primary show.
6. Install secondary shoe on support plate.
-
Insert strut in shoe and guide shoe onto anchor pin.
-
Temporarily secure shoe with retaining pin.
7. Install anchor plate and adjuster cable eyelet on support plate anchor pin.
8. Install cable guide in secondary shoe and position cable in guide.
