Dakota 4WD V6-239 3.9L VIN X FI (1989)
Fan Blade: Service and Repair
Removal and Installation
REMOVAL
1. Disconnect fusible link in egine compartment.
2. Remove fan shroud from radiatior and position out of way.
3. Loosen fan belt.
4. Remove fan from fluid drive assembly from water pump.
5. Remove fan from fluid drive.
INSTALLTION
1. Install fan to fluid drive.
2. Install fan and fluid drive assembly to water pump.
3. Adjust and tighten fan belt to specifications.
4. Connect fusible link.
