Dakota 4WD V6-239 3.9L VIN X FI (1989)
6. Install the reservoir so that the drain tube aligns with the mounting lugs on the reservoir.
7. Snap the lower-most fuel coil into mounting lugs in the top of the reservoir.
8. Snap the drain tube into the lugs on the bottom of the reservoir.
Fuel Gauge Sending Unit Wiring Terminals
9. Connect the electrical wires to the fuel gauge sending unit.
10.
Align the index hole on the reservoir with the index tab of the new sending unit mounting bracket.
Fuel Gauge Sending Unit Service
11.
Attach sending unit to mounting bracket and tighten the mounting screws.
INSTALLATION
1. Wipe seal area of tank clean, and install a new O-ring seal on pump.
