Dakota 4WD V6-3.7L (2008)
2. Connect the cable end (3) to the latch arm.
NOTE: Upper cable end shown, lower cable end similar.
3. Connect the cable housing to the shut face handle and connect the cable end (1).
CAUTION: Do not allow the watershield or adhesive to become contaminated with dirt or other foreign substances.
Do not damage the watershield during removal and installation.
If the watershield becomes contaminated or damaged, replace the watershield.
4. Install the watershield. See: Rear Door Panel/Service and Repair/Door - Cargo (Club Cab)/Watershield/Installation
Removal
REMOVAL