Dakota 4WD V6-3.7L (2008)
Rear Door Striker: Adjustments
Door - Cargo (Club Cab)
Striker-Lower Latch
ADJUSTMENTS
1. Using a grease pencil or equivalent, mark the location of the door latch striker (1) on floor sill to aid in adjustment.
2. Loosen the two bolts (2) that secure the door latch striker to the floor sill.
3. To adjust the lower front gap and flush measurement, change the position of the door latch striker and then tighten the two bolts to 28 Nm (21 ft.
lbs.) .
4. Verify correct door and latch position.
Striker-Upper Latch
ADJUSTMENTS
1. Using a grease pencil or equivalent, mark the location of the door latch striker (1) on roof rail to aid in adjustment.
2. Loosen the two bolts (2) that secure the door latch striker to the roof rail.
3. To adjust the upper front gap and flush measurement, change the position of the door latch striker and then tighten the two bolts to 28 Nm (21 ft.
lbs.) .
4. Verify correct door and latch position.