Dakota 4WD V6-3.7L (2008)
Seat Cushion: Service and Repair
Seat Cushion / Cover - Installation
INSTALLATION
1. Before proceeding with the following repair procedure, review all warnings and cautions. See: Service Precautions
2. Position the cushion cover and foam over the seat pan and connect the j-straps.
3. Position the seat cushion assembly onto the seat frame and install the clamps.
4. Connect the wire harness to the seat cushion pan, if equipped.
5. Install the bolts and tighten to 10 Nm (90 in. lbs.).
6. Connect battery negative cable.
