Dakota 4WD V6-3.7L (2008)
1. Raise and support the vehicle.
2. Remove the front wheel and tire assembly.
3. Remove the caliper slide pin bolts (4)See: Disc Brake Caliper - Removal.
4. Remove the disc brake caliper (1) from the adapter (2).
CAUTION: Never allow the disc brake caliper to hang from the brake hose. Damage to the brake hose will result. Provide a suitable
support to hang the caliper securely.
5. Remove the inboard (4) and outboard (2) brake pads. See: Brake Pad/Service and Repair/Removal and Replacement/Brake Pads - Removal.
6. Remove the caliper adapter mounting bolts (5).