Dakota 4WD V6-3.7L (2008)
4. Lower the engine into mounts using special tool (1) # 8534.
5. Install both the left and right side engine mount through bolts. Tighten the bolts to 68 Nm (50 ft. lbs.).
6. Remove special tool # 8534.
7. Install structural dust cover.
NOTE: On 4WD vehicles, the front axle must be lowered, to provide clearance for oil pan removal. It is not necessary to remove the front
axle from the vehicle, or remove the axle shafts.
8. For 4WD Vehicles Raise axle using suitable jack.
9. For 4WD Vehicles Install the front axle mounting bolts.
10. For 4WD Vehicles Install the pinion bracket.
11. For 4WD Vehicles Install the front driveshaft to the front axle.
12. Fill engine oil.
13. Reconnect the negative battery cable.
14. Start engine and check for leaks.
