Dakota 4WD V6-3.7L (2008)
Evaporator Core: Service and Repair
Removal
REMOVAL
1. Remove the HVAC housing and place it on a workbench See: Housing Assembly HVAC/Service and Repair/Removal and Replacement/HVAC
Housing - Removal.
2. Disassemble the HVAC housing See: Housing Assembly HVAC/Service and Repair/Overhaul/Disassembly.
NOTE: Inspect the evaporator seal located in the upper half of the HVAC housing. If the seal is damaged or deformed, the seal must be
replaced.
3. Carefully lift the A/C evaporator (1) out of the lower half of the HVAC housing (2).
NOTE: If the rubber flange around the evaporator tubes is deformed or damaged, the flange must be replaced.
4. If required, remove the rubber flange (3) from around the evaporator tubes (4).
