Dakota 4WD V6-3.7L (2008)
Power Steering Line/Hose: Service and Repair
Power Steering Hoses - Installation
Return Hose - Without Cooler
RETURN HOSE - WITHOUT COOLER
1. Install the return hose to the vehicle.
2. Reconnect the return hose (4) at the reservoir (2).
3. Reconnect the return hose (4) at the gear (6). Tighten the tube nut to 37 Nm (27 ft. lbs.).
4. Route the return hose and secure.
5. Remove the support and lower the vehicle.
6. Refill the power steering system,See: Steering and Suspension/Steering/Power Steering/Power Steering Bleeding/Service and Repair.
Pressure Hose
PRESSURE HOSE
1. Install the pressure hose (2) to the vehicle.
2. Reconnect the pressure hose (2) at the gear (4). Tighten the tube nut to 31 Nm (23 ft. lbs.).
3. Remove the support and lower the vehicle.
