Dakota 4WD V6-3.7L (2008)
6. Raise the vehicle on a hoist, See: Maintenance.
7. Install the nut (2) securing the cable (1) to the starter solenoid (3). Tighten the nut to 13 Nm (115 in. lbs.).
8. Connect the battery cable retaining pushpin (6) securing the cable to the engine block.
9. Lower the vehicle.
10. Connect the battery positive cable terminal clamp (8). Tighten the battery terminal clamp pinch-bolt hex nut to 5 NmM (45 in. Lbs.).
11. Position the resonator (4) into the vehicle. Install the bolts (3) into the air intake resonator (4) and tighten the band clamp (2) on the air inlet tube
(1).
12. Connect the battery negative cable terminal clamp. Tighten the battery terminal clamp pinch-bolt hex nut to 5 NmM (45 in. Lbs.).
13. Check the vehicle for normal operation.
