Dakota 4WD V6-3.7L (2008)
1. Remove the shock See: Suspension Strut / Shock Absorber/Service and Repair/Front Strut / Shock/Removal.
NOTE: Extreme pressure lubrication must be used on the threaded portions of the tool. This will increase the longevity of the tool and
insure proper operation during the removal and installation process.
2. Install special tools to press the bushing (3) out of the lower control arm (4) using special tools C-4212-F (Press) (1), 9653-1 (driver) (4) and
9653-2 (Receiver) (5).