dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

ABOUT US
Actuators and Solenoids - Transfer Case > < Torque Converter Clutch Solenoid, A/T|Removal

Dakota 4WD V6-3.7L (2008)

Page 1
background image

Torque Converter Clutch Solenoid: Service and Repair
Installation

INSTALLATION

NOTE: If the Solenoid/Pressure Switch assembly is being replaced, the Quick Learn Procedure must be performed. See: Automatic
Transmission/Transaxle/Control Module/Service and Repair/TCM Quick Learn

1. Install Solenoid/Pressure Switch Assembly (1) and screen (3) to the separator and transfer plates.

2. Install and tighten retaining screws (2) to 5.5 Nm (50 in. lbs.) torque.
3. Install valve body. See: Automatic Transmission/Transaxle/Valve Body/Service and Repair/Removal and Replacement/Installation

Actuators and Solenoids - Transfer Case > < Torque Converter Clutch Solenoid, A/T|Removal