Dakota 4WD V6-3.7L (2008)
Seals and Gaskets: Service and Repair
Seal-Adapter Housing
Removal
REMOVAL
1. Remove the transfer case See: Transfer Case/Service and Repair/Removal and Replacement/Transfer Case - Removal.
2. Using a screw mounted in a slide hammer, remove the adapter housing seal.
Installation
INSTALLATION
1. Install a new adapter housing seal with Universal Handle C-4171 and Seal Installer C-3860-A.
2. Install the transfer case See: Transfer Case/Service and Repair/Removal and Replacement/Transfer Case - Installation.