Dakota 4WD V6-3.7L (2008)
Shift Solenoid: Service and Repair
Removal
REMOVAL
NOTE: If the Solenoid/Pressure Switch Assembly is being replaced, the Quick Learn Procedure must be performed. See: Relays and Modules -
Transmission and Drivetrain/Relays and Modules - A/T/Control Module/Service and Repair/TCM Quick Learn
1. Raise vehicle on hoist.
2. Remove valve body assembly from transmission. See: Automatic Transmission/Transaxle/Valve Body/Service and Repair/Removal and
Replacement/Removal
3. Remove Solenoid/Pressure Switch Assembly retaining screws (2) from solenoid.
4. Remove Solenoid/Pressure Switch Assembly (1) and screen from valve body (2).
