Dakota 4WD V6-3.7L (2008)
9. Remove the window switch and install the watershield. See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service
and Repair/Front Door Watershield/Installation
Manual
INSTALLATION
1. Place the regulator into the door and engage the bolts (5 and 3) into the keyhole slots in the door.
2. Install the regulator mechanism bolt (1).
3. Install the two lower bolts (5).
4. Tighten all the regulator bolts to 9.5 Nm (85 in. lbs.).
5. Remove the tape used to secure the glass during removal and position the glass (1) into the glass clamps.
6. Temporarily install the window crank handle and raise the glass into the full up position.
7. Tighten the glass clamp screws (2) securely.