Dakota 4WD V6-3.7L VIN K (2005)
Evaporative Emission Control Canister: Service and Repair
REMOVAL
The EVAP canister (2) is mounted to the top of the fuel tank (6). Both the EVAP canister (2) and NVLD pump (3) can be removed without removing the
fuel tank.
1. Raise and support vehicle.
2. Remove left-rear tire.
3. Remove plastic shield in front of left-rear tire. Access to both the EVAP canister (2) and NVLD pump (3) can be achieved from the area in front of
the removed tire and plastic shield.
4. Remove vapor hose from NVLD pump (3).
5. Remove vapor line (5) from EVAP canister (3) by pressing on both tabs (2) simultaneously.
