Dakota 4WD V6-3.7L VIN K (2005)
g.
Follow the on-screen instructions and perform prompts as required.
h.
When update is completed, select "OK".
19.
Check all modules for Diagnostic Trouble Codes (DTC's).
NOTE:
Due to the PCM programming procedure, a DTC may be set in other modules (TCM, FCM, CCN, WCM, etc.) within the vehicle, if so
equipped. Some DTC's may cause the MIL to illuminate. Check all modules using "ECU View" from the "Home" screen, record the DTC's,
and erase these DTC's prior to returning the vehicle to the customer. Erase any DTC's in the PCM only after all other modules have had their
DTC's erased.
20.
Continue with Section "C"- Install the Authorized Modifications Label.
C. Install the Authorized Modifications Label
1.
Type or print (with a ballpoint pen) the recall number, dealer code and date on the Authorized Modifications Label (Figure 3).
2.
Attach the label near the VECI label and then close the hood.
D. Complete Proof of Correction Form For California Residents
This recall is subject to the State of California Registration Renewal/Emissions Recall Enforcement Program. Complete a Vehicle Emission Recall Proof
of Correction Form (Form No. 81-016-1053) and supply it to vehicle owners residing in the state of California for proof that this recall has been
performed when they renew the vehicle registration.
