Dakota 4WD V6-3.9L VIN X (1997)
14. Remove secondary brake shoe from support plate.
15. Remove strut and spring.
16. Remove parking brake lever from secondary shoe.
17. Remove primary shoe from support plate.
18. Disengage parking brake lever from parking brake cable.
INSTALLATION
1. Clean and inspect individual brake components.
2. Lubricate anchor pin and brake shoe contact pads on support plate with high temperature grease or Lubriplate.
3. Lubricate adjuster screw socket, nut, button and screw thread surfaces with grease or Lubriplate.
4. Attach parking brake cable to lever, then connect lever to secondary shoe.
5. Install primary shoe on support plate. Secure shoe with new spring retainers and pin.
6. Install spring on parking brake strut and engage strut in primary.
7. Install secondary shoe on support plate. Insert strut in shoe and guide shoe onto anchor pin. Temporarily secure shoe with retaining pin.
