Dakota 4WD V6-3.9L VIN X (1997)
10. Connect the coil wires.
11. Connect the heat indicator sending unit wire.
12. Connect the heater hoses and bypass hose.
13. Install distributor cap and wires.
14. Hook up the return spring.
15. Connect the accelerator linkage and if so equipped, the speed control and transmission kickdown cables.
16. Install the fuel lines.
17. Install the generator and drive belt. Tighten generator mounting bolt to 41 Nm (30 ft. lbs.) torque.
18. Install the air cleaner.
19. Fill cooling system (refer to Cooling System for the proper procedure).
20. Connect the negative cable to the battery.
