Dakota 4WD V6-3.9L VIN X (1997)
Headlamp Relay: Service and Repair
REMOVAL
WARNING: ON VEHICLES EQUIPPED WITH AIRBAGS, REFER TO AIR BAGS AND SEAT BELTS/AIR BAGS BEFORE
ATTEMPTING ANY STEERING WHEEL, STEERING COLUMN, OR INSTRUMENT PANEL COMPONENT DIAGNOSIS OR
SERVICE. FAILURE TO TAKE THE PROPER PRECAUTIONS COULD RESULT IN ACCIDENTAL AIRBAG DEPLOYMENT AND
POSSIBLE PERSONAL INJURY.
1. Disconnect and isolate the battery negative cable.
2. Remove the fuse access panel by unsnapping it from the left end of the instrument panel.
Headlamp Relay Remove/Install
3. Unplug the headlamp relay from the junction block.
4. Install the headlamp relay by aligning the relay terminals with the cavities in the junction block and pushing the relay firmly into place.
5. Connect the battery negative cable.
6. Test the headlamp relay operation.
7. Install the fuse access panel.