Dakota 4WD V6-3.9L VIN X (1997)
Brake Fluid: Service and Repair
FLUID SPECIFICATIONS
The brake fluid used in this vehicle must conform to DOT 3 specifications and SAE J1703 standards. No other type of brake fluid is recommended
or approved for usage in the vehicle brake system. Use only Mopar brake fluid or an equivalent from a tightly sealed container.
CAUTION: Never use reclaimed brake fluid or fluid from an container which has been left open. An open container will absorb moisture from
the air and contaminate the fluid.
CAUTION: Never use any type of a petroleum based fluid in the brake hydraulic system. Use of such type fluids will result in seal damage of the
vehicle brake hydraulic system causing a failure of the vehicle brake system.
FLUID LEVEL INSPECTION
CAUTION: Always clean the master cylinder reservoir and caps before checking fluid level. If not cleaned, dirt could enter the fluid.
Brake Fluid Level Inspection
The fluid fill level is indicated on the side of the master cylinder reservoir. The correct fluid level is to the FULL indicator on the side of the
reservoir. If necessary, add fluid to the proper level.
