dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Technician Safety Information|Page 144 > < Technician Safety Information|Page 142
Page 1
background image

Central Timer Module ( CTM ) High Option: Vehicle Damage Warnings

Vehicle Damage Warnings

VEHICLE DAMAGE WARNINGS

Before disconnecting any control module, make sure the ignition is "off". Failure to do so could damage the module.

When testing voltage or continuity at any control module, use the terminal side (not the wire end) of the connector. Do not probe a wire through the
insulation; this will damage it and eventually cause it to fail because of corrosion.

Be careful when performing electrical tests so as to prevent accidental shorting of terminals. Such mistakes can damage fuses or components. Also, a
second code could be set, making diagnosis of the original problem more difficult.

Road Testing A Complaint Vehicle

ROAD TESTING A COMPLAINT VEHICLE

Some complaints will require a test drive as part of the repair verification procedure. The purpose of the test drive is to try to duplicate the diagnostic
code or symptom condition.

CAUTION:  Before road testing a vehicle, be sure that all components are reassembled. During the test drive, do not try to read the DRB screen while
in motion. Do not hang the DRB from the rear view mirror or operate it yourself. Have an assistant available to operate the DRB.

Technician Safety Information|Page 144 > < Technician Safety Information|Page 142