Dakota 4WD V6-3.9L VIN X (1997)
Power Window Circuit Breaker: Testing and Inspection
1. Locate the correct circuit breaker in the fuse- block module. Pull out the circuit breaker slightly, but be sure that the terminals still contact the
terminals in the fuseblock module cavities.
2. Connect the negative lead of a 12-volt DC voltmeter to a good ground.
3. With the voltmeter positive lead, check both terminals of the circuit breaker for battery voltage.
If only one terminal has battery voltage, the circuit breaker is faulty and must be replaced. If neither terminal has battery voltage, repair the open circuit
from the Power Distribution Center (PDC) as required.