Dakota 4WD V6-3.9L VIN X (1997)
Fig. 39 Power Regulator Bolts
18. Loosen the three bolts that secure the regulator to the keyed holes of the inner door panel.
19. Remove the three remaining bolts that secure the regulator to the inner door panel.
20. Remove the power window regulator and motor as a unit from the door through the lower access hole in the inner door panel.
21. Reverse the removal procedures to install. Tighten the regulator mounting bolts and the glass lift channel nuts to 9 N.m (80 in. lbs.).
