Dakota 4WD V6-3.9L VIN X (1997)
Windshield Washer Spray Nozzle: Description and Operation
SYSTEM OPERATION
Washer Nozzle And Plumbing
Pressurized washer fluid is fed through a single hose, attached to a barbed nipple on the washer pump. The hose is routed through a grommet
inserted in a hole in the cowl plenum panel to an in-line fitting located in the cowl plenum area, beneath the cowl plenum cover/grille panel.
A hose from the in-line fitting in the cowl plenum is routed through clips molded into the underside of the cowl plenum cover/grille panel to a Y
fitting near the passenger side washer nozzle. Hoses from the Y fitting are routed to the two washer nozzles, which are snap-fit into openings in the
cowl plenum cover/grille panel.
The two fluidic washer nozzles are not adjustable. The nozzles and hose fittings cannot be repaired and, if faulty or damaged, they must be
replaced.