Dakota 4WD V8-318 5.2L (1991)
MASTER CYLINDER INSTALLATION
1. Position master cylinder on brake booster mounting studs.
2. Slide combination valve bracket onto cylinder mounting studs.
3. Install and tighten cylinder mounting nuts to 28 Nm (250 in lb) torque.
4. Connect brake lines to master cylinder. Tighten line fittings to 19 Nm (170 in lb) torque.
5. Connect ground wire to combination valve bracket.
6. Tighten any brake lines at combination valve and rear antilock valve, if loosened or disconnected.
7. Fill and bleed brake system.
