Dakota 4WD V8-318 5.2L (1991)
Rocker Arm Assembly: Service and Repair
Fig. 12 Intake & Exhaust Rocker Arm Identification
Fig. 13 Rocker Arm Location, Left Bank
1.
Disconnect spark plug wires from spark plugs.
2.
Disconnect PCV hose and fuel evaporation control system hoses from cylinder head cover.
3.
Remove cylinder head cover and gasket.
4.
On 1988-91 models, proceed as follows:
a.
Remove four rocker shaft bolts and retainers.
b.
Remove rocker arm and shaft assembly.
c.
If rocker arm assemblies are disassembled for cleaning or replacement, refer to Fig. 12, for rocker arm identification and Fig. 13, for
positioning on the shaft. On engines with exhaust valve rotators, exhaust rocker arm must have relief for clearance.
5.
On 1992 models, remove rocker arm bolt, pivot and the rocker arm.
6.
On all models, reverse procedure to install, tightening bolts to specifications.
