Dakota 4WD V8-318 5.2L (1991)
Engine Mount: Service and Repair
Rear Mount
2 Wheel Drive
Fig. 3 Rear Engine Mount. 2 Wheel Drive Models
1.
With vehicle raised and supported, position a transmission jack and raise rear of transmission and engine assemblies slightly.
2.
Remove rear mount through bolt and attaching screws to frame crossmember, Fig. 3.
3.
Raise rear of transmission enough to provide mount to crossmember clearance, then remove mount.
4.
Reverse procedure to install. Refer to Fig. 3, for torque specifications.
4 Wheel Drive
Fig. 5 Rear Engine Mount. 4 Wheel Drive Models
1.
Raise and support vehicle.
2.
Position suitable transmission jack under transmission, then raise rear of transmission slightly.
3.
Remove rear mount support bracket to transmission attaching bolts, Fig. 5.
