dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Thermostat Housing Gasket - Coolant Leak|Page 847 > < Engine Rear Main Bearing Seal - Oil Leak Diagnosis|Page 838
Page 1
background image

Thermostat Gasket: Customer Interest
Thermostat Housing Gasket - Coolant Leak

NO.: 07-02-91

GROUP:

COOLING

DATE:

July 15, 1991

SUBJECT:

Thermostat Housing Gasket Coolant Leak 3.9L And 5.2L Engines

MODELS:

1990 - 1991

(AB) Ram Van/Wagon (RWD)
(AD) Ram Pickup (RWD, 4WD)/Ram Cab & Chassis 

Ramcharger (RWD, 4WD)/Power Ram Cab & Chassis (4WD) 

(AN) Dakota/Dakota Sport/Dakota Cab & Chassis

DISCUSSION:

A new thermostat gasket PN 53020198 has been released for service. The new gasket has a silicon bead on one side and provides improved sealing.

This new gasket should be used when diagnosis indicates a thermostat gasket coolant leak.

NOTE:

THIS NEW GASKET MAY ALSO BE USED ON ALL 1971 THROUGH 1989 DOMESTIC, CHRYSLER, DODGE, PLYMOUTH, CARS
AND TRUCKS EQUIPPED WITH 5.2L AND 5.9L ENGINES.

PARTS REQUIRED:

1 - Gasket, Thermostat Housing      

PN 53020198

Figure 1

REPAIR PROCEDURE:

This repair involves draining the cooling system and replacing the thermostat gasket.

NOTE:

THE NEW GASKET HAS A BEAD OF SILICON ON ONE SIDE OF THE GASKET ONLY.

1. Drain the cooling system and remove the thermostat as outlined in the appropriate service manual.

2. Thoroughly clean the thermostat housing and intake manifold mating surfaces.

Thermostat Housing Gasket - Coolant Leak|Page 847 > < Engine Rear Main Bearing Seal - Oil Leak Diagnosis|Page 838