Dakota 4WD V8-318 5.2L (1991)
3. Place the new gasket PN 53020198 onto the thermostat opening in the intake manifold. The silicon bead on the new gasket must face up. Figure 1.
4. Insert the thermostat (spring side down) through the gasket into the opening in the intake manifold.
5. Install the housing over the thermostat. Ensure the thermostat is positioned in the recess in the housing.
6. Tighten the mounting bolts to 200 in.lbs (23 N-m) torque.
7. Fill the cooling system as outlined in the appropriate service manual.
POLICY:
Information only