Dakota 4WD V8-318 5.2L (1991)
16.
Tape the terminal back to the harness (See Figure 4).
17.
Install the new harness terminal into cavity F.
18.
Install the wedge.
19.
Remove the IP ground nut (See Figure 5).
20.
Install the harness ground eyelet and tighten the screw to 29 in.lbs.
21.
Connect the cluster connectors, install the cluster and knee blocker.
POLICY: Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
Labor Operation No.
AN
08-45-30-99
1.9 Hrs.
AD
08-45-30-99
0.7 Hrs.
08-45-30-60 (With Skid Plate)
0.5 Hrs.
FAILURE CODE: XX - Service Adjustment
