Dakota 4WD V8-318 5.2L (1991)
Throttle Valve Cable/Linkage: Adjustments
A500/A518 4-Speed
Fig. 12 Throttle rod adjustment
Fig. 13 Throttle rod adjustment. Chrysler models, 1987-89 w/5.2L/V8-318 & 5.9L/360 & 1988-89 w/3.9L/V6-238
Fig. 14 Throttle rod adjustment. 1990-92 Chrysler models w/3.9L/V6-238, 5.2L/V8-318 & 5.9L/360
1.
On 1990-92 models, Retract Idle Speed Control (ISC) actuator with jumper wire as follows:
a.
Ensure engine is shut Off, then disconnect electrical connector at ISC actuator.
b.
Connect pair of jumper wires to battery, then negative jumper to top pin of ISC and positive jumper to second pin of actuator.
c.
Leave jumpers connected for no more than 5 seconds, then disconnect. Actuator is now fully retracted.
2.
On all models, raise and support vehicle, then loosen adjustable swivel lock screw, Figs. 12 through 14. Ensure swivel slides freely on throttle
