Dakota 4WD V8-4.7L (2009)
Rear Door Interior Handle: Service and Repair
Rear Door Latch Cable - Removal
REMOVAL
CAUTION: Do not allow the watershield or adhesive to become contaminated with dirt or other foreign substances.
Do not damage the watershield during removal and installation.
If the watershield becomes contaminated or damaged, replace the watershield.
1. Remove the watershield. See: Rear Door Panel/Service and Repair/Watershield - Removal
Upper Latch Cable
NOTE: The upper latch cable is serviced as an assembly with the upper latch.
1. Remove the upper latch bolts (1).
2. Separate the cable support clips (2).
