Dakota 4WD V8-4.7L (2009)
Rear Door Striker: Adjustments
Rear Door Lower Latch Striker - Adjustments
ADJUSTMENTS
1. Using a grease pencil or equivalent, mark the location of the door latch striker (1) on floor sill to aid in adjustment.
2. Loosen the two bolts (2) that secure the door latch striker to the floor sill.
3. To adjust the lower front gap and flush measurement, change the position of the door latch striker and then tighten the two bolts to 28 Nm (21 ft.
lbs.) .
4. Verify correct door and latch position.
